Skip to main content
Find your way

Getting organized can start with a simple hi.

Message me on WhatsAppA free trial, no card needed.

Transporte cotidiano · free tool

Energy, cost and recharge time calculator

Adding power to the battery requires more power from the grid when there are losses. Enter the useful capacity, load variation and session efficiency. Timing uses average effective power, which may differ from the peak advertised by the charger.

Free, no sign-up required

Do it with your values

Usable battery capacity in kWh. Check that it is not the gross capacity.

Current state of charge, from 0 to 100%.

Desired state, equal to or greater than the initial one.

Battery energy divided by grid energy, in %.

Average effective power received from the network during the session, in kW.

Price per kWh supplied by the grid, not a per-minute fee.

Fixed charge for a session started, if any.

The calculation stays in your browser. Nothing is sent.

In action

See an example

Usable battery of 60 kWh, from 20% to 80%: it receives 36 kWh. With 90% efficiency, the grid supplies 40 kWh, and 4 kWh are lost. At 7.20 kW of average power, charging takes about 5.56 hours. With energy at R$1/kWh and R$5 per session, the total is R$45.

Use “Fill in example” to try these fictional values.

How we calculate

  1. Multiplicamos a capacidade útil pela diferença entre carga desejada e inicial para obter a energia acrescentada à bateria.
  2. Dividimos essa energia pela eficiência em forma decimal para estimar a energia da rede. A diferença entre rede e bateria representa perdas.
  3. O tempo é a energia da rede dividida pela potência média. O custo soma o preço por kWh e a tarifa fixa. Se não houver energia a acrescentar, não há sessão nem cobrança.

The battery receives less than the meter registers

Use the efficiency and usable capacity of your car.

Part of the energy is lost along the way. Efficiency is the ratio between what goes into the battery and what comes from the grid. There is no single percentage for every electric car, and heating or cooling change this ratio.

Check whether the capacity you have is usable or gross. The charge percentage refers to the usable part, and a wrong capacity distorts the calculation.

The calculator does not measure losses or set the charge level recommended by the manufacturer.

Average power sets the time

Use the average of a similar session, not the charger peak.

Power varies with the battery, the charger, the temperature and the charge level. Dividing by the maximum power of a fast charger ignores this variation. Treat the time as an estimate.

Left out of the price-per-kWh-plus-fixed-fee model:

  • per-minute fees
  • parking
  • charges for occupying the space after charging ends

The tool also does not size the outlet, circuit or charger.

Questions when filling out

Can I use the surge from a fast charger?

The field calls for average power, not peak. If the load reduces in power during part of the session, using the ad maximum may underestimate the time needed.

If the current load is already equal to the target?

The added energy will be zero and the model will not start a session or charge a flat fee. Check the operator's actual charge, which may have different connection or parking rules.

Sources and further reading

Meet Focca and how we treat your data.

Organize everyday life with Focca

When the top-up is complete, record the actual payment and compare it to the estimate. See how to track transport expenses at Focca.

Try it on WhatsApp

See how it works or explore the plans.